| SPECIAL
EQUIPMENT |
| |
The
BA Rapid deployment boards come in 2 or 4 tally. They are designed
to allow for fast deployment of BA wearers into an incident without
initial back up and extra crew, the ECO can then come along and
see how long the initial team have been inside, these units are
ideal for brigades that operate on smaller numbers of crews.
|
WEBER Hydraulic Door Opening Kit |
Technical
data
Max spreading force 89KN Max. spreading distance
105mm
Max working pressure 720 bar
Total weight 16kg |
| 
WEBER S 30 HYDRAULIC CUTTER
|
Extremly
light and compact cutter for tensionfree cutting e.g. of control
pedals, steering wheels, steel bars and door chains
Technical
data
Opening 33 mm Cutting capacity (round steel bar)
15 mm Cutting capacity (flat steel ) 8 x 40 mm Weight 3,7 kg
|
| 
WEBER HAND - VARIO SPS 250 H
|
Manual
powered combi tool with integrated hydraulic drive.
Two functions with one tool: spreading and cutting.
For
safe and silent rescue work after road, rail, industrial or construction
site accidents, as well as natural disasters.
Technical data
Opening width 250 mm Spreading force (25 mm inwards) 40 kN
Max. spreading force 83 kN Max. cutting force220 kN |
|
|
| 
TIRFOR HAND OPERATED CABLE WINCHES
link
to more equipment at Tractel Group
|
The
TIRFOR TU and T500 range of machines are used for light
and heavy duty applications whenever there is a need for lifting
or pulling loads over long periods in difficult conditions.
They
are easy to handle and operate with a high mechanical advantage
to lift, pull and position with unlimited length of wire rope.
Carefully manufactured and assembled to very strict quality control
standards, each machine is individually tested to 50% overload.
|
Hose Winder
|
The hose winder has a fully galvanised frame and
handle, the winder hub is designed for 70mm instantaneous couplings
and can wind up to 90mm feeder hose |
QUICK
FIST rubber clamp
The
QUICK FIST clamp is made of transportation grade rubber, is not
bothered by heat or cold and is UV resistant. Holds objects 1/2"
to 3" (13mm to 76mm) in diameter. |
Qick Fist mounts easily to keep Hooligan tools , Hamaxes, shovels
and other tools or implements securely in place.
Mounting base measures 7/8" x 2 3/4" (22mm x 70mm).
Use on fire trucks, work vehicles, off road trucks, military equipment,
law enforcement vehicles, 4x4s, ATVs, RVs, boats or on any wall.
Each clamp supports approximately 22lbs (10kilos).
Blister pack hold two clamps.
|
SUPER QUICK FIST rubber clamp
Made of transportation grade rubber, is not bothered by heat or
cold and is UV resistant.
Holds objects 3" to 9.5" (76 to 240mm) in diameter .
|
Super Quick Fist mounts easily to keep fire extinguishers, BA cylinders,
hose branches, hydraulic rescue tools and other large objects securely
in place.
Mounting base measures 7/8" x 6" (22 x 152mm).
Use on fire trucks, work vehicles, off road trucks, military equipment,
law enforcement vehicles, 4x4s, ATVs, RVs, boats or on any wall.
One clamp supports a safe working load of 50 lbs. (23 kilos).
Blister pack hold two clamps |
2008